C-TEC CFP Standard 2 Zone Conventional Fire Alarm Panel

Certified to EN54 parts 2 4 and 13 C-TEC’s CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.

Supplied in an attractive flush or surface mountable plastic enclosure it includes two detector zones four conventional sounder circuits class change and alert inputs on-board fire and fault relays and combined keypad/keyswitch entry.

A wide range of engineering functions are also provided including selectable zone delays coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.

Optional repeaters and relay expansion boards also available.

Approvals/certifications
Certifed to EN54 Parts 2 & 4 by the LPCB. Certified to EN54-13 by Kiwa Telefication.

Mains supply
230V 50/60Hz.

Mains rated current
350mA maximum.

Internal power supply
19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).

Total output current limited to
1.5A @ 230Vac (ImaxA eq 146mA).

Quiescent current
25mA (mains failed internal sounder active PSU & gen fault LED lit)

Max battery size and type
2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.

No. of detector zone circuits
2 (Max. length per circuit is 500m).

Call point resistor value
470 to 680Ω.

Max. devices per detector zone
25 detectors (or 32 detectors/manual call points combined).

No. of conventional sounder circuits
4 (Max. length per circuit is 500m).

EOL resistor value
6800Ω 5% Tol. 0/25W (blue grey red gold).

Alarm voltage
27V max 20V min (final battery voltage)

Max. sounder output current
4 x 200mA (800mA total).

Auxiliary relays
Two: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.

Open collector outputs
Two: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA Max. open circuit voltag

Other outputs
24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).

Auxiliary inputs
Two: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger Max. input voltage 27V (non-latching)

Engineer (AL3) functions
Program coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al

Expansion connections
Yes – for optional network driver cards (one required per repeater system) relay output cards and EN54-13 sounder circuit interface boards.

Product dimensions (mm)
380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).

Construction & finish
Plastic lid and base; RAL7035 textured

IP Rating
IP30.

Weight
1.75kg (without batteries)

Operating conditions/temperature
-5ºC to +40ºC. Max relative humidity: 95%.