Quick Fit BNC Male to AV Terminal Connector for Coaxial CCTV Cable

Traditional BNC termination requires either a crimping tool to compress the BNC body onto the cable braid and jacket, or soldering the centre conductor to the BNC pin. The quick-fit BNC terminal connector removes both requirements, terminating onto the coaxial cable using screw terminals or clamp fittings that the cable conductors are inserted directly into.

For site work where a full BNC crimping kit is not available, for temporary terminations during commissioning and testing, and for quick field repairs where a soldering iron is impractical, the quick-fit terminal BNC connector provides a functional termination that can be completed with a screwdriver alone.

The signal quality of a quick-fit connector is generally adequate for standard definition and HD CCTV at typical installation distances. For critical high-definition signal paths over long cable runs, a properly crimped or soldered BNC connector provides a more reliable mechanical and electrical connection. For the majority of day-to-day CCTV installation requirements, the quick-fit connector is a practical and effective solution.

For CCTV engineers and installers across London and the UK who need a fast and tool-light BNC termination option for site work, testing, and short-run permanent connections, the quick-fit BNC terminal connector is a useful stock item in the installation kit.

Key Features

• Quick-fit BNC male connector terminating via AV screw or clamp terminals
• No crimping tool or soldering required for termination
• Suitable for rapid field BNC connections on RG59 coaxial cable
• Useful for temporary commissioning connections and quick field repairs
• Requires only a screwdriver for installation
• Compatible with standard RG59 CCTV coaxial cable