Round Cable Clips 6mm for Single RG59 Coaxial and Cat6 Network Cable

The 6mm round clip is the correct size for RG59 coaxial cable (standard CCTV coax, approximately 6mm outer diameter) and Cat6 network cable (approximately 6mm jacket), which are both slightly thicker than standard Cat5e (approximately 5mm) and require the larger clip size for a proper fit.

Using the correct clip diameter is important: a clip that is too small will crush the cable and deform the outer jacket, which damages the coaxial shield and causes signal degradation in RG59, and deforms the Cat6 cable geometry which affects impedance. A clip that is too large allows the cable to move and sag rather than holding it firmly in position.

The 6mm clip is distinguished from the 5mm clip (also available) by its slightly larger internal diameter. For installations using a mixture of Cat5e (5mm) and RG59 or Cat6 (6mm), the correct clip size should be selected for each cable type used.

Round clips are nailed or stapled to the surface at regular intervals (every 250-500mm in straight runs, and closer together at bends and junctions) to maintain the cable route and provide a professional, tidy installation.

For CCTV and network installers completing RG59 coaxial and Cat6 cable runs across London and the UK, the 6mm round cable clip provides the correct fixing for these cable sizes.

Key Features

• 6mm internal diameter: correct for RG59 coaxial and Cat6 cable outer jackets
• Round clip: nail or staple to wall and ceiling surface for cable fixing
• Different from 5mm clip: 6mm is for RG59 coax and Cat6, not Cat5e
• Correct clip size prevents cable crushing and signal degradation in RG59
• Fix at 250-500mm intervals in straight runs, closer at bends
• For Cat5e cable use 5mm round cable clips